From the perspective of raw materials, we can find that in terms of interface and location, the price of this product can be lower, but not too expensive in terms of price.

In addition, we can find that on CNC lathes, surface finish, corrosion resistance, wear resistance, and aesthetics are integrated. We can observe the use of cutting tools. By using similar rotational speeds and paying attention to the smoothness of cutting, we can also determine the hardness used. Cutting can be performed well under any chip removal condition, and pipe jacking can also be performed by enhancing the tip angle so that it can see a mold with greater cutting ability than the one passed.

After understanding the characteristics of the cutting tool, we found that the cooling of the accessories on the cutting tool caused the tool handle to become blocked, and some unprocessed pipes also began to "soften".

Machine clip type milling cutter BE (C— 388) has a wide range of tool diameters, and machining various types of milling cutters with seamless standards is the key to achieving at least 3% of the cost.

Some end mills and end mills have poor surface quality and direct damage. Milling cutter chamfers, milling cutter hole surfaces, etc., all affect the performance of the milling cutter. Therefore, the amount of milling cutter is small. Four edge rough milling cutters and single edge rough milling cutters are more suitable for machining horizontal surfaces. Generally, 10-20 ° taper shank is processed. Finishing milling requires multiple cutters. Try to use shorter tool handles with consistent tool diameters to reduce cutting vibration. And the radial cutting force of the milling cutter. A knife with a long step has a strong radial cutting ability, k=5 mm/s, which is difficult to process 5 blades, h=3 mm/s. Because the radial cutting force is not large, h=5 mm/s, because k=15 mm/s is the diameter of the milling cutter, the cutting speed is no faster than k=75 mm/s. Because of the use of rough machining, semi rough machining, finishing, and non cutting depth matching off hinges, the milling cutter is subjected to repeated reciprocating operations.

Large structural mold, large structural mold has been composed: X axis, Y axis, Z axis stroke can be adjusted at will, the machine tool workbench adopts a unique width reduction device, bringing convenience in upstream and downstream selection.

With the development of science and technology, changes in market demand have gradually extended to modern CNC machining enterprises. The CNC vertical lathe machining is commanded and controlled by the CNC system, and a power amplification selection servo control system is selected for the CNC vertical lathe machining.

Vertical CNC lathes can process rotating parts such as discs, rods, sleeves, flats, and shafts, and are used in digital display applications. In terms of spindle power, rotation range, net weight, rotational cutting feed speed, spindle head vibration patterns, and feed magnification, they optimize the spindle structure and improve the cutting performance of the machine tool. They are especially suitable for semi finishing and finishing of complex workpiece, and for processing single, small batch, and complex workpiece.